Home Page | About Us | Products | Contact | References | Human Recources | Downloads |

Progress Pelletmill

In the last 30 years PTN developed and improved their Pelletmills. More than 9 different sizes of pelletmills, with capacities from 3 till more than 30 ton/hour. The automatic roller adjustment is well known in the market. Our automatic roller adjustment is operating by one oil cylinder on the back of the pelletmill.

Product description

The Progress pelletmills are built around a solid welded housing with integrated foundation for direct 4 point mounting. Direct on the housing the foundation for mainmotor has been mounted and due to intermediate belt-driven shaft the die speed can be selected from 3,5 m/sec. and up, depending on formulation. The heavy mainshaft with rollers are dimensioned for 2 or 3 rollers. The shaft is drilled through for rolleradjustment, shaft for central greasing of rollers and main bearings. The main shaft is fixed and supported by 2 bearings in the housing. It is equipped with outside shearpin against overload caused by "strange" objects. The roller distance is set hydraulically, through an outside cylinder and the regulation shaft which is bearingfixed in the main shaft. The rotor with bolted main pulley is mounted on the main shaft by 2 strong bearings.

Advantages of the Progress Pelletmill

Solid construction with integrated foundation and built in motor consoles.
Double constructed pressdoor and inlet in stainless steel.
Large die surface and rollers.
Two-step transmission for low noise operation meeting the demand for new noiselevel regulations.
Grease pump for central greasing of all main bearings.
Patented hydraulic rolleradjustment as standard.
Electrical connections mounted in connecting box mounted on pelletmill.
Die speed from 3,5 m/sec.
Extra equipment: Quick Die Change and Forced Feeder